€5,30 – €8,35 excl. VAT
Este bolsillo consta de un marco de plástico y una malla de polietileno y se adapta a los fermentadores Kemper First/Intermediate.
La malla abierta proporciona una excelente permeabilidad al aire alrededor de la masa y el diseño de las bolsas mejora los resultados de limpieza.
The materials used for the frame and the inlay
THE FRAME
The raw material used for the pocket’s frame is a plastic that has been specifically developed for its application: to come into direct contact with moist and oil film containing dough pieces. The frame’s surface feels a bit “greasy” which in daily practice means that contamination adheres less easily to the frame’s surface. Because it adheres less strongly, any contamination at the same can easily be removed during cleaning.
The resin is executed with a standard UV stabilizer which makes it resistant to the impact of the UV radiation of the UV-lamps.
An extra UV stabilizer enhances the resin’s ability to withstand the impact of the UV radiation. The complete additive package is stabilezed by adding more additives that for instance avoid the white colored frame from turning yellowish after years of usage.
The UV stabilizer extends the lifetime of the pocket as it avoids the plastic from becoming brittle.
The available colours of the frame
Our pockets’ frames are available in White, Blue and Yellow. However, for orders just as low as 500 pcs the frame can be made in any custom colour.
When you consider a custom colour please contact us.
We’ll be glad to prepare an offer based on your specific requirement.
Metal Detectable
The frames of all our larger pockets are available in a Metal Detectable version as well.
Here we offer two colours: BLUE and WHITE / GREAY
Food Grade Materials – FRAME
The compound for the frames is always made of Food Grade plastics, certified to come into direct contact with food stuffs.
This also applies to the meshes and felt used in our pockets and trays.
THE MESH
Food Grade Materials – MESH
The meshes used for our pockets are always made of Food Grade plastics, certified to come into direct contact with food stuffs.
This applies to both the WHITE as well as the BLUE coloured mesh types.
Which inlay types are available, where do they differ and what is their application
Our pockets come with different kind of inlays: various mesh types and felt:
Ad 1. Open Mesh type, code 95020 – WHITE.
All our larger sized pockets are executed with type 95020 mesh. Due to the configuration of yarn diameter and mesh width, the mesh is fine enough to avoid the dough from sinking inside the maze during proofing time. Once the dough is inside the maze it causes the dough to stick to the mesh. At the same time the mazes are that wide that air circulation is optimized, and therefore provide perfect proofing conditions.
Type 95020 is our standard mesh type, executed in white color and is used in all our larger pockets.
Ad 1. 1. Open Mesh type, code 95021 – BLUE.
In addition, we offer a Blue version of the type 95020 mesh.
In the unthinkable situation that fibers come loose from a broken yarn, a blue fiber will be found more easily on the dough, rather than a white fiber, simply because no other ingredients in the bakery process are blue-colored.
Since blue is an uncommon color for dough / bread pieces many items in bakeries are already, where possible, made in blue colored materials.
Ad 2., 3. and 4. These inlay materials are mainly used in our smaller pockets (or cups) that are mounted in Kaiser and other small bread intermediate proofers.
Fully dependent on the type of dough and the proofing/resting time inside the pocket, you can choose from one of these mesh options.
Food Grade Materials:
All our pockets and cups are made from Food Grade material and are meant to come into direct contact with food stuffs.
Increased volume for extended proofing time
For some reason you may want to extend proofing time.
Longer proofing implicates an increased dough ball volume. The increased volume requires the pocket’s bowl to be larger as well.
For extended proofing time we offer all our larger pocket models in a “deeper mesh” execution.
Please contact us in case you have a requirement for a deep-mesh pocket.
Already available for, for instance Gefra, Ter Haar, De Ridder, Van Dijk, H2A intermediate proofers.
