Back
Previous product
Bolsillo de fermentación - ¡Marco flexible! - se adapta a WP Haton (BIP 72) - (orificio de la bandeja ⌀193 mm) €5,45 excl. VAT
Next product
Bolsillo fermentador Elcee (LC) €5,75 – €8,75 excl. VAT
Click to enlarge

Proofer (Prover) pocket, fits among others, WP Haton (BIP 72) – Tray hole ⌀193 mm

€5,30 – €6,35 excl. VAT

In the tabs below you'll find more information about the options.
Limpiar
Request free sample

    Fill in the fields below to request your sample.

    Food contact declaration
    Request Quotation

      Fill in the fields below to request your quotation.

      SKU: 50 Categoría:
      Descripción

      Descripción

      Esta bolsa de fermentación es adecuada para su uso, entre otros, en los fermentadores Werner Pfleiderer Haton BIP 72 (E).

      El bolsillo consta de un marco de plástico y una malla de polietileno.
      Se adapta a los fermentadores intermedios WP Haton con un diámetro de orificio de bandeja de 193 mm.

      Nota: ¡También está disponible una copa WP Haton para diámetros de orificio de 191 mm!
      ¡Comprueba el diámetro del agujero en la bandeja antes de realizar tu pedido!

      La malla abierta proporciona una excelente permeabilidad al aire alrededor de la masa.
      El diseño de los bolsillos proporciona resultados de limpieza mejorados y excelentes.

      Versiones de marco flexible de esta canasta de nailon.
      Nuestros bolsillos redondos también están disponibles con borde flexible.
      El borde flexible garantiza una colocación y extracción más rápida de la bandeja.
      ¡Y esto significa que ahorra tiempo y costes!

      ¿Quieres más información sobre estos nuevos bolsillos flexibles?
      Por favor contáctenos a través del número de teléfono +31 85-0711877 o a través de info@bekeproofercups.com

      Colores disponibles.
      Esta cesta de nailon se puede pedir con un marco blanco estándar, combinado con una malla blanca.
      Otras opciones son un marco de color azul, combinado con malla blanca o azul.

      Metales detectables.
      Además de las versiones antes mencionadas, se puede pedir la cesta de nailon con estructura metálica detectable de color azul, combinada con malla de color blanco o azul.

      Compuesto.
      El compuesto desarrollado para la producción del marco contiene varios aditivos que proporcionan una bolsa duradera.
      Uno de los aditivos es un bloqueador de rayos UV, que bloquea la radiación UV de las lámparas UV-C instaladas dentro de la cámara de fermentación.
      El bloqueador UV retrasa el proceso por el cual la resina se vuelve quebradiza con el tiempo y extiende la vida útil del marco de las bolsas.
      Otro aditivo asegura que el color permanezca como está, evita que se desvanezca.

      Limpieza.
      Los bolsillos son fáciles de limpiar con un limpiador suave y sencillo.
      Nuestro consejo es hacer esto de forma periódica, de forma preventiva.
      Un limpiador suave puede simplemente aflojar la suciedad y después se puede enjuagar.
      Limpie el bolsillo antes de que la contaminación permanezca por mucho tiempo, se vuelva demasiado dura o tenga demasiado tiempo para empapar el plástico.
      En cuanto a limpiador, puedes pensar en una solución de jabón verde, o con el limpiador diario que se utiliza en la cocina.

      Llevar el líquido de limpieza a temperatura favorece el efecto de los limpiadores.
      Nota: ¡la temperatura no puede exceder los 55-60C!
      Esto es para evitar que la malla se encoja bajo la influencia de temperaturas demasiado altas.

      ¿Información?
      ¿Quieres más información sobre el mantenimiento y limpieza de nuestros bolsillos?
      Por favor contáctenos a través del número de teléfono +31 85-0711877 o a través de info@bekeproofercups.com

      Información adicional

      Información adicional

      Peso 0,065 kg
      Fits also proofers made by

      , , ,

      Shape

      Quality

      ,

      Color

      , , , ,

      Closure

      Mesh

      Model

      Quality materials

      Quality materials

      What is the difference between Basic and Plus materials?

      The frames of all our pockets come in two different plastic compositions:

      1. Basic Material
      2. Plus Material

       

      Basic Material is a plastic that has been specifically developed for its application: to come into direct contact with moist and oil film containing dough pieces. The plastic feels a bit “greasy” which in daily practice means that contamination adheres less easily to the frame’s surface. Because it adheres less strongly, any contamination at the same is easily removed.
      The resin is executed with a standard UV stabilizer which makes it resistant to the impact of UV beams of the UV lamps.

      For Plus Material the same base resin is used as for Basic Material, however, now several additives have been added. Like Anti-microbial that prevents bacteria from growing on the frame’s surface.
      In addition, an extra UV stabilizer that enhances the resin’s ability to withstand the impact of the UV lamp beams. The additive package is kept stabile by adding other additives that for instance avoid the white colored frame from turning yellowish after years of usage.
      The UV stabilizer extends the life time of the pocket, the Anti-microbial provides a clean and hygiene product.

      When chose for Basic or for Plus Material?

      (Semi) Industrial exploitation – Basic Material
      When a pocket is going to be used in a (semi) industrial environment, the pocket is used intensively [contamination vs cleaning liquids] and more frequently (mechanical [drop of the dough ball in the mesh] than in an artisan environment. In this situation the mesh, the weakest part of the pocket, will be the part that wears and tears first. That determines that a pocket needs to be replaced.
      If pockets do not meet a life time of 1- 2 years we advise to choose for the Basic material option.
      The Plus Material additive package only shows its presence after 6-8 years of usage, and when the mesh tears within a 1 – 2 year time frame you will not benefit from the package and thus not from your investment in a higher product price.

      Artisan exploitation – Plus Material
      If the pocket is used in an artisan environment the pockets are used only a couple of times a day. The mechanical and chemical exposure is significantly lower, however, longer because there is no reason to replace the pocket because the mesh remains undamaged. In this situation the additive package proves his presence: the pocket is being exposed to UV light for a longer period of time. Identical to the situation with contamination adhering to the frame. The additive package enables you to work with the pocket for years and years.
      In this situation the choice must be the Plus Material.

      Note concerning the available colors of the frame
      Basic Material: standard available in White, Blue and Yellow. However, for orders just as low as 500 pcs the frame can be made in any custom color.
      Plus Material: standard available in White, Blue and Yellow. Other custom colors become available with volumes starting from 5000 pcs.
      When you are considering a custom color please contact. We’ll be glad to prepare an offer based on your specific requirement.

      Metal Detectable
      This version comes in Plus Material only.

      Food Grade Materials
      Both compounds for Basic and Plus Material obviously are made of Food Grade plastics, certified to come into direct contact with food stuffs.
      This also applies to the meshes and felt used in our pockets and trays.

      Mesh

      Mesh

      Which types are available and where do they differ, what is their application

      Our pockets are offered with different kind of inlays: meshes and felt:

      1. Open Mesh type, code 95020. Available in White and Blue.
      2. Fine Mesh type, code T200. At this moment available in white only.
      3. A mesh type between meshes 1. And 2: code T420. At this moment available in white only.
      4. Needle Felt. Available in white finish.

       

      Ad 1. All our larger sized pockets are executed with code 95020 mesh. Due to the configuration of yarn diameter and mesh width the mesh is fine enough to avoid the dough from sinking inside the mazes during proofing time, causing the dough to stick to the mesh. At the same time the mazes are that wide that air circulation is optimized, and therefore proofing is perfect.

      This is our standard mesh type, executed in white colored yarn, used in all our larger pockets.
      In addition, we offer a Blue version of this mesh. In the unthinkable situation that fibers come lose from a broken yarn, a blue fiber will be found more easily than a white fiber simply because no other ingredients in bakeries are blue-colored.
      Since blue is an uncommon color for dough / bread pieces many items in bakeries are already, where possible, made in blue colored materials.
      Upon request from our customer base we recently introduced the blue mesh option.

      Ad 2., 3. and 4. These inlay materials are mainly used in our smaller pockets (or cups) that are mounted in Kaiser and other small bread intermediate proofers.
      Fully dependent on the type of dough and the proofing/resting time inside the pocket you can choose from one of these options.

      Food Grade Materials: All four products obviously have Food Grade approval and are certified to come into direct contact with food stuffs.

      Increased volume for extended proofing time
      Note: It can happen that for some reason you need or would like to extend proofing time. Longer proofing implicates a larger dough ball volume which requires a pocket’s mesh to give room to this increased dough volume.
      For these situations we offer all our larger pocket models in a “deeper mesh” execution.
      Please contact us in case you have a requirement for a deep-mesh pocket.
      Already available for, for instance a Gefra, Ter Haar, De Ridder, Van Dijk, H2A intermediate proofer.